02/25/2014 04:15 PM
Window Blank Out
On this page:
MCI 102 A-2
MCI 102 A-3
using smaller 10' panels
Using the more easier to get 4'x10' x 1/8" Aluminum
panels for A/C units
are not a
flexible Aluminum sheet,
These panels are rigid and have to be delivered by a flat
One - 1/8"x 4'x 41' long sections,
No joints or seems anywhere in the panel
This special panel is made near Philadelphia, Pa just for
All one 40+' length to cover one side of the Bus
at a time
No Panel joints or seams to worry about leaking!
to the patent pending process...
blank out panel applications below do not show equipment necessary for proper installation"
MCI 102 A-2
We use 1/8" Aluminum, not 1/16"' like most everyone else.
The metal Being
thicker you have much less distortion during hot days
The do it yourselfer cannot install these panels because of the
special equipment and skills needed
We use Hi Adhesive Sika Flex Adhesive just like the new bus manufacturers
but our metal is twice as thick and heavy.
Also, by using Sika Flex, the adhesive moves some with the panel when it
We went from Hundreds of rivets to almost none.
If this is something you would like to learn more about, then call our
Free Advice Hotline and speak to one of our engineers at our Allentown, PA Plant.
Bus Conversion101.com and Buses101.com are
the property of Next Level Coach, LLC